PE jaw crusher fixed jaw plate
Jaw plates (fixed and swing jaw plate) are the most important wear parts of jaw crusher. We use high manganese steel with chrome as the material to make sure the quality.
Raw materials are crushed to small aggregates between movable jaw plate and fixed jaw plate. So movable jaw plate impacts raw material directly during the operation-time. Supposing that it is damaged, raw materials will impact the movable jaw of jaw crusher and the machine service-life will also be affected.
Jaw plate is manufactured high manganese steel. The special processing techniques ensure that our jaw plate has leading performance:
1)Using cold processing hardening technology, the hardness is improved.
2)Water toughening technology to avoid making the performance poor during the process of natural phase change.
High manganese jaw plate
1. Fixed, swing, toggle jaw plate
2. Material: Mn13Cr2, Mn18Cr2
3.20 years' experience
4. Wearable&OEM
Jaw plates (fixed and swing jaw plate) are the most important wear parts of jaw crusher. We use high manganese steel with chrome as the material to make sure the quality.
Raw materials are crushed to small aggregates between movable jaw plate and fixed jaw plate. So movable jaw plate impacts raw material directly during the operation-time. Supposing that it is damaged, raw materials will impact the movable jaw of jaw crusher and the machine service-life will also be affected.
Jaw plate is manufactured high manganese steel. The special processing techniques ensure that our jaw plate has leading performance:
1)Using cold processing hardening technology, the hardness is improved.
2)Water toughening technology to avoid making the performance poor during the process of natural phase change.
High manganese jaw plate
1. Fixed, swing, toggle jaw plate
2. Material: Mn13Cr2, Mn18Cr2
3.20 years' experience
4. Wearable&OEM
High Manganess Casting Material Chemical Composition | |||||||
Code Elem. | C | Mn | Si | Cr | Mo | P | S |
ZGMn13-1 | 1.0-1.45 | 11.0-14.0 | 0.30-1.0 | - | - | ≤0.09 | ≤0.04 |
ZGMn13-2 | 0.90-1.35 | 11.0-14.0 | 0.30-1.0 | - | - | ≤0.09 | ≤0.04 |
ZGMn13-3 | 0.9-1.35 | 11.0-14.0 | 0.30-0.8 | - | - | ≤0.09 | ≤0.04 |
ZGMn13-4 | 0.9-1.30 | 11.0-14.0 | 0.30-0.8 | 1.50-2.0 | - | ≤0.09 | ≤0.04 |
ZGMn13-5 | 0.75-1.30 | 11.0-14.0 | 0.30-1.0 | - | 0.90-1.2 | ≤0.09 | ≤0.04 |